Guides and Manuals

US Smart Plug WIFI

Need help setting up your new US Smart Plug? here is a full guide on how to set it up

US Smart Plug Setup Instructions

Parameters

Product: US WIFI Smart Wall Plug
Rated Voltage: 100-240V
Rated Current: 16A (Max.) AC
Frequency: 50-60Hz Max. Power: 3400W for 240V

Part l: Download & Registration

  • Scan the QR code to download the “Smart Life” App from App Store or Google Play.
  • Launch the Smart Life App and follow the in-app instructions to register an account and connect the Smart Plug to your 2.4 GHz WIFI home network. You will be asked to provide your email or phone number during account registration in order to receive a verification code.

Part 2: Easy Mode (Recommended)

  • Connect the smart plug into an electrical outlet and long-press the On/Off button for 5 seconds until the indicator light flashes rapidly. This indicates the Smart Plug is ready to be connected to the “smart life app” interface.
  • Make sure your phone is connected to WIFI (2.4GHz ONLY) and has access to the internet.
  • Tap the “+” icon on the top right corner of “smart life app”.
  • Make sure the light on your Smart Plug is rapidly flashing, then tap the related button in the application.
  • Choose the local WIFI network and enter the correct password. Tap “Next”.
  • Wait for a successful connection message, then tap “Done”.Here is a walkthrough set of images

That’s it! enjoy your new smart device!

Part 3: AP Mode (Access Point)

  • If the setup fails in EZ mode, try using the AP mode from the failed screen, or tap the “+” icon at the top right corner of “Smart Life App”. add the specific device and click “AP Mode” at the top right corner.
  • Make sure the light is flashing rapidly and then Long press the On/Off button until the indicator light slowly flashes, then tap the related button in the application, enter into another interface. Tap “Next”. Go to “Connect now”, choose a Wi-Fi hotspot named “SmartLife-XXXX”, then back to the “Smart Life” application.
  • Wait for a successful connection. Then tap “Done”.
  • You can rename the smart power plug by tapping the icon in the middle of the screen.

Notice

  • Please follow the instructions on the smart plug specification and keep the Smart Plug in a good and safe condition.
  • Place the smart power plug in proper condition and out of reach.
  • Connect the smart plug to the electricity socket directly and all the way in.
  • The total power of electrically connected appliances should not be more than the maximum power of the socket.
  • Do not disassemble or reinstall the socket. Otherwise, it may cause security risks.
  • This guide also applies to EU WIFI Smart Power Plug , UK WIFI Smart Power Plug , US Smart WIFI Power Plug

Leave a Reply